Help: Creating a Helmet

by Muiredach on Mon, 07/16/2007 - 09:37

For the gap, your best bet is to either use a small slither of plastic from a lego shutter or fill it in with a modeling putty and sanding it. For the visor, the easiest way would be to put a small peice of black tape in the inside of the helmet, or fill it partially in with some type of putty...

Keep Customizing!

-Jon

hey, great Idea Muiredach!

by Legofreak on Mon, 07/16/2007 - 11:06

hey, great Idea Muiredach! Black tape would probably work great. So would the filling in with putty, since you'd have to fill in the gap where you cut the backpack off anyway..

I suppose the only way other than those would be to cut up a pair of real sunglasses to get a tiny T shape.. and that would take more skill than I have.. :-P

There is no such thing as innocence, only degrees of guilt.

~MCN Moderator: WIP, Decal & Customizing Chat ~

For the record "pls" is not

by Damien on Mon, 07/16/2007 - 12:12

For the record "pls" is not a word. Don't use netspeak here, it annoys the Moderators. Especially us old timers that still remember when people wrote and typed in something resembling a real language. Also, keep in mind that subject lines should be as clear about the content of the message as possible. "Opinions please" does not really tell anyone what to expect from the thread, and thus makes them more likely to ignore it.

I cleaned that up for you. And good luck with your project.

MCN Moderator of Customization Tips, Techniques & Questions

With all due respect,

by JBF22 on Mon, 07/16/2007 - 16:38

With all due respect, Damien, I believe that there was nothing wrong with my title, given to the fact that helmets were not the only thing in my post.

But your the boss...

The illustrious JBF...no comment, pls.

Feel free to edit your first

by Damien on Mon, 07/16/2007 - 19:33

Feel free to edit your first post and change the topic title to reflect what you need. I only changed it quickly while I was online because the helmet seemed the major portion of your post. Change it to whatever suits your fancy - just keep it in mostly lower-case instead of all capital letters, please.

MCN Moderator of Customization Tips, Techniques & Questions

You can use some kind of

by Recluce on Wed, 07/18/2007 - 23:23

You can use some kind of modeling putty to fill in the crack on the back of the mandy helm. As for the visor, using a piece of VCR tape works well. You know, the "tape" in a tape?

Emily J. Brownlow

MCN Supervisor Moderator

Leader of the Sneaky Forum Ninja Assasination Squad

~Custom Cast Helmets and Hairpieces~

thanks alot everyone.

by JBF22 on Thu, 07/19/2007 - 12:04

thanks alot everyone.

The illustrious JBF...no comment, pls.

Main Navigation

User login

Navigation

Who's online

Help: Creating a Helmet